Beko User Interface / Control Lock Issue

Washer powers on but will not start a cycle; Start/Pause button unresponsive or just beeps.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Child lock (key lock) activated, Faulty Start/Pause button, Defective user interface PCB, Loose ribbon cable to main PCB

Safety first: Unplug the washer before opening any panels.

Step-by-step checks:

Check child lock: On many Beko models, holding specific buttons (e.g., 3 and 4) toggles child lock. Refer to the user manual and ensure the lock icon is off.
Reset machine: Unplug for 5 minutes, then reconnect and try again.
Inspect control panel: Remove the fascia and check the Start/Pause button for mechanical sticking. Ensure the ribbon cable to the main PCB is firmly seated.

If the UI board is faulty, it may need replacement.

Medium 3/5

User Interface / Control Panel

Check Price on Amazon

We may earn a commission from links on this page.