Washer fills with water even when switched off, slowly over time

Safety first: Turn off the water supply taps and unplug the washer. Do not leave the machine unattended with taps open until the fault is fixed.

Step-by-step checks:

• Check for siphoning: Ensure the drain hose is installed at the correct height and not sealed airtight into the standpipe, which can cause backflow.
• Inspect inlet valve: Remove the top cover and examine the inlet valve. If water continues to drip into the drawer or tub with power off and taps open, the valve is leaking internally and must be replaced.
• Clean filters: Remove and clean the inlet filters to ensure debris is not holding the valve slightly open.