Blomberg
Start Circuit / Program Inhibit Fault
Washer powers on but will not start any program when Start/Pause is pressed
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door not fully closed or lock not engaged, Child lock function active, Faulty Start/Pause button, Control board input fault
How to Fix / Troubleshooting
Safety first: Unplug the washer before removing the control panel or door lock.
Step-by-step checks:
- Door closure: Close the door firmly until you hear a click. Check for obstructions around the door seal.
- Child lock: Refer to the user manual to disable the child lock (often by holding specific buttons). Ensure the lock icon is off.
- Door lock test: If the lock symbol does not appear when starting a program, test and replace the door lock assembly as needed.
- Start button: Remove the control panel and test the Start/Pause button for continuity when pressed. Replace the user interface board if the switch is faulty.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements