Washer overfills or leaks from the door; display shows E04.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck water inlet valve, Blocked or detached pressure switch hose, Faulty pressure switch, PCB not closing inlet valve

Immediate action: Unplug the washer and close the water taps to stop filling.

Check inlet valve:

If water continues to enter with power off, the inlet valve is mechanically stuck open and must be replaced.

Inspect pressure system:

Check the pressure hose and air chamber for blockages or disconnection as described for D10.
Test the pressure switch operation and replace if faulty.

If E04 recurs with a new valve and good pressure system, the PCB may be energizing the valve incorrectly and should be replaced.

Hard 4/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.