Fisher & Paykel Control Panel / UI Glitch

Washer displays random lights or beeps and buttons do not respond

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Static discharge or power surge, Moisture in control panel, Faulty user interface PCB, Loose UI ribbon cable

Safety first: Unplug the washer before opening the console.

Power reset: Leave unplugged for 5–10 minutes, then reconnect and test.
Dry and clean console: If moisture is suspected, carefully dry the area and clean with isopropyl alcohol.
Reseat ribbon cable: Disconnect and reconnect the UI ribbon cable to ensure a solid connection.
Replace UI board: If symptoms persist, replace the Fisher & Paykel user interface board.

Medium 3/5

Fisher & Paykel User Interface Board

Check Price on Amazon

We may earn a commission from links on this page.