Fisher & Paykel Overheating Electrical Component

Washer emits burning smell or electrical odor during operation

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failing motor windings, Slipping or jammed drive causing motor overload, Shorted control board component, Loose or burnt wiring connection

Safety first: Immediately unplug the washer and do not continue using it until the source is identified. Fire risk is present.

Visual inspection: Remove rear or top panel and look for burnt wiring, connectors, or components on the control board.
Check motor area: Inspect the motor and harness for discoloration or melted insulation.
Do not bypass safety devices: Replace any burnt components with genuine Fisher & Paykel parts. If the source cannot be clearly identified, contact a qualified technician.

Professional Required 5/5

Fisher & Paykel SmartDrive Motor

Check Price on Amazon

We may earn a commission from links on this page.