E67
Frigidaire
Control Board Voltage Error
Washer will not start; E67 displayed; control board power error
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect line voltage, Failed main control board power supply, Shorted component on control board
How to Fix / Troubleshooting
Safety first: Unplug the washer. Only qualified persons should test live voltage.
- Verify supply voltage: Use a multimeter to confirm that the outlet supplies correct voltage (typically 120V AC in North America). Correct any household wiring issues.
- Inspect control board: Remove and visually inspect for burnt components, swollen capacitors, or damaged traces.
- Check for shorts: Disconnect loads (motor, heater, pump) one at a time and see if E67 changes, indicating a shorted peripheral. Replace any shorted component.
- Replace main control board: If supply voltage is correct and no external shorts are found, replace the main control board.
- Test startup: Reassemble and attempt to start a cycle to confirm E67 is cleared.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements