Washer shows E75; water inlet temperature sensor error (on models with inlet sensor)

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed inlet temperature sensor, Loose connector at sensor, Damaged wiring to sensor

Safety first: Unplug the washer before servicing.

Locate inlet sensor: On some Frigidaire models, the sensor is near the water inlet valve or fill chamber.
Test sensor: Disconnect and measure resistance at room temperature. Replace if open, shorted, or out of spec.
Inspect wiring: Reseat connectors and repair any damaged wires.
Replace sensor: Install a new inlet temperature sensor if faulty.
Verify operation: Run a warm cycle to ensure proper function and that E75 is cleared.

Medium 3/5

Inlet Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.