GE Profile Water Supply Error

Washer displays error code 1 and will not start or stops shortly after starting.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed or partially closed supply valves, Clogged inlet screens, Failed water inlet valve, Low household water pressure

Safety first: Turn off power and water before disconnecting hoses.

Verify valves: Confirm both hot and cold faucets at the wall are fully open.
Check hoses: Inspect for kinks or crushing. Straighten or replace as needed.
Clean screens: Disconnect hoses at the washer and clean the inlet screens with water and a soft brush.
Test fill: Reconnect, restore water and power, and run a fill test. If the code returns, the inlet valve assembly may need replacement.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.