E57
GE Profile
Motor Overcurrent / Overload Error
Washer shows E57 and may stop during spin or not reach full spin speed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overloaded drum, Binding tub bearings, Shorted motor windings, Faulty motor control board
How to Fix / Troubleshooting
Safety first: Unplug the washer before internal inspection.
- Rebalance and reduce load: Remove heavy items and redistribute remaining clothes evenly. Run a spin-only cycle to see if the error clears.
- Check drum movement: With the washer empty and unplugged, rotate the drum by hand. It should spin freely. Resistance, grinding, or wobble suggests bearing or mechanical issues.
- Inspect motor and belt (if belt-driven): Access the motor area and check for a seized motor, damaged belt, or foreign objects between drum and tub.
- Advanced testing: A technician can test motor windings and current draw. If the motor is shorted or bearings are seized, replace the drive motor. If the motor tests good, the motor control board may be at fault.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements