E95
GE Profile
Internal Control Hardware Error
Washer displays E95 and may not start or may shut down unexpectedly during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective microcontroller on main board, Overheating of control components, Power surge damage, Shorted peripheral circuit
How to Fix / Troubleshooting
Safety first: Unplug the washer before inspection.
- Allow cool-down: If the washer is installed in a tight, hot space, allow it to cool and ensure adequate ventilation around the control area.
- Inspect for shorts: Check wiring harnesses for pinched or rubbed-through insulation that could short to the cabinet.
- Visual board inspection: Look for burnt or cracked components on the main control board.
- Replace main control: E95 almost always indicates a failed control board. Replacement should be done with the correct GE Profile part and may require professional service.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements