Display shows LID LOCKED and lid will not open at end of cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck lid lock, Failed lock solenoid, Control not sending unlock signal, Wiring issue

Safety first: Unplug the washer. Do not pry the lid open with force.

Wait a few minutes: Some models delay unlocking after spin.
Power reset: Unplug for 5 minutes, then plug in and press Cancel or Power to trigger unlock.
Manual release: Access the lid lock from the top or front and use the manual release tab (if provided).
Replace lock: If the lock remains stuck, replace the lid lock assembly.

Medium 3/5

Lid Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.