NO FILL
GE Profile
Fill Failure
Display shows NO FILL; washer does not fill with water.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Closed valves, Kinked hoses, Clogged inlet screens, Failed inlet valve coil
How to Fix / Troubleshooting
Safety first: Turn off power and water before hose removal.
- Verify water supply: Confirm both hot and cold valves are open and water flows at nearby faucets.
- Inspect hoses and screens: Straighten hoses and clean inlet screens at the washer.
- Replace inlet valve: If water supply is good and NO FILL persists, replace the water inlet valve assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Inlet Valve Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements