GE Profile
No Power / Dead Control
Washer will not power on; no lights or display, unit appears completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, Faulty power outlet, Damaged power cord, Failed main control board
How to Fix / Troubleshooting
Safety first: Do not open electrical panels unless you are qualified. Unplug the washer before internal inspection.
- Check household power: Verify the circuit breaker is on and not tripped. Test the outlet with another appliance.
- Inspect power cord: Look for cuts, burns, or crushed sections. If damaged, replace the cord assembly.
- Try another outlet: Temporarily plug the washer into a known-good outlet (no extension cords) to rule out outlet issues.
- Internal fuse/control: Some GE Profile models have internal fuses on the control board. If accessible, a technician can test and replace them. If the board is not powering up, it may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements