Washer displays E58 and may not drain completely or may intermittently fail to drain.

Safety First: Unplug the washer and have towels ready.

• Clean filter: Open the drain filter access (if equipped), drain water, and remove the filter. Clean thoroughly and reinstall.
• Inspect impeller: Shine a light into the pump housing and check the impeller for strings, hair, or small objects. Remove any obstructions.
• Check drain hose: Ensure the drain hose is not kinked and that the end is not inserted too far into the standpipe, which can cause siphoning or restriction.
• Verify house drain: Run water into the standpipe from a sink or bucket to ensure it drains freely. A slow house drain can cause E58-like symptoms.
• Replace pump if weak: If the pump runs but is noisy, hot, or fails to move water effectively even when clear, replace the GE drain pump.