E08

Gram Unbalanced Load / Spin Protection

Washer does not spin; E08 displayed near the end of cycle

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Severely unbalanced laundry load, Worn suspension shock absorbers, Faulty drum position or speed sensing, Excessive vibration detected by control

How to Fix / Troubleshooting

User-level actions:

Open and redistribute: Once the door unlocks, open the door and redistribute the laundry evenly around the drum. Remove heavy single items and try spinning them separately.
Check load size: Avoid washing a single heavy item alone. Add a few smaller items to balance the drum.
Level the washer: Ensure your Gram washer is level on the floor. Adjust the front feet so the machine does not rock when pushed diagonally.

If E08 continues frequently:

Inspect suspension: Unplug the washer, remove the rear or front panel, and inspect the shock absorbers. If they are leaking oil, bent, or offer little resistance, replace them as a pair.
Check drum play: Excessive vertical or lateral play may indicate worn bearings or suspension, which can cause chronic imbalance.

Warning: Excessive vibration can damage hoses and wiring. Do not continue using the washer if it moves violently during spin.

Repair Difficulty

Medium 3/5

Required Part

Shock Absorbers

Check Price on Amazon

We may earn a commission from links on this page.