Huebsch Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E CL
Display shows E CL or child lock symbol; buttons do not respond.
Control Lock / Child Lock Activated
E dC
Washer drains but does not spin; display shows E dC (drain complete, spin not allowed).
Spin Inhibit Due to Door or Unbalance
E dL
Washer attempts to lock the door/lid, clicks several times, then stops and displays E dL.
Door Lock Unable to Lock
E dLr
Washer completes cycle but door remains locked; display may show E dLr or similar lock release error.
Door Lock Release Failure
E dO
Washer will not start and displays E dO, indicating the door/lid is open even when it appears closed.
Door Open Detection Fault
E dP
Washer displays E dP and will not proceed; often occurs at the start of drain or spin.
Drain Pump or Drain Path Error
E dr
Washer stops mid-cycle and displays E dr; door remains locked for an extended time or unlocks unexpectedly.
Door Lock Communication Error
E dS
Washer will not start spin or drain; display shows E dS indicating door switch error during spin.
Door Switch Open During Spin
E FL
Washer will not start; display shows E FL shortly after pressing Start.
Door/Lid Lock Failure
E HE
Washer shows E HE and may stop heating or abort hot cycles (models with internal heater).
Heater Circuit Error
E Hr
Washer displays E Hr and may not complete cycles; often related to heater or temperature sensing (heater-related error).
Heater Relay or Temperature Regulation Error
E LE
Washer attempts to start but stops and displays E LE; drum may not move.
Motor Lock / Locked Rotor Error
E LF
Washer fills for a long time but does not reach proper level; display shows E LF (long fill).
Long Fill Condition
E nF
Washer will not fill with water; display shows E nF or fills very slowly then errors out.
No Fill / Fill Timeout
E OE
Washer displays E OE and may stop mid-cycle with water still in the tub.
Overflow or Drain Error (Model-dependent)
E OF
Washer continues to fill and may overflow; display shows E OF or overfill error.
Overfill / Water Level Sensing Failure
E PS
Washer displays E PS and will not start or stops randomly during cycle.
Power Supply or Control Voltage Error
E SP
Washer will not enter spin; display shows E SP or spin error.
Spin Cycle Failure
E tL
Washer displays E tL and may not sense load size correctly; water level seems wrong.
Load Sensing / Torque Limit Error
E tS
Washer stops and displays E tS; cycle time does not advance correctly.
Thermistor/Temperature Sensor Fault (for models with internal heater or temp sensor)
E Ub
Washer stops or will not reach full spin speed; display shows E Ub or unbalance error.
Unbalanced Load Detection
Symptom
Detergent remains in the dispenser drawer at the end of the cycle.
Dispenser Not Flushing Properly
Symptom
Front-load washer door will not open at end of cycle, but there is no error code.
Door Stuck Closed
Symptom
Top-load washer agitator moves weakly or only the bottom portion moves.
Worn Agitator Dogs / Clutch
Symptom
Washer display and lights work but buttons do not respond or respond intermittently.
User Interface / Control Panel Failure
Symptom
Washer emits a loud grinding or rumbling noise, especially during spin.
Tub Bearing Failure
Symptom
Washer fills but will not agitate; drum does not move during wash portion of cycle.
No Agitation
Symptom
Washer has a strong moldy or musty odor inside the drum.
Biofilm / Mold Build-Up
Symptom
Washer hums but does not start filling, agitating, or spinning.
Stalled Motor or Pump
Symptom
Washer is leaking water from the front or bottom during wash or spin.
Water Leak
Symptom
Washer leaves black or greasy marks on clothing.
Contamination from Drive System or Mold
Symptom
Washer leaves clothes still soapy or with detergent streaks after cycle.
Poor Rinsing
Symptom
Washer makes loud banging or knocking noises during spin.
Excessive Vibration / Out-of-Balance Noise
Symptom
Washer takes much longer than normal to complete cycles; time remaining jumps or stalls.
Extended Cycle Time / Control Rebalancing
Symptom
Washer trips the household breaker or GFCI during operation.
Electrical Short / Ground Fault
Symptom
Washer vibrates excessively and "walks" across the floor during spin.
Severe Vibration / Walking Washer
Symptom
Washer will not drain; water remains in tub after cycle ends.
No Drain
Symptom
Washer will not power on at all; no lights or display.
No Power / Dead Control
Symptom
Washer will not spin; clothes come out soaking wet at the end of the cycle.
No Spin / Spin Failure
Symptom
Water slowly seeps into the drum when the washer is off.
Inlet Valve Seepage
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E CL |
Display shows E CL or child lock symbol; buttons do not respond.
|
Control Lock / Child Lock Activated | View Details |
| E dC |
Washer drains but does not spin; display shows E dC (drain complete, spin not allowed).
|
Spin Inhibit Due to Door or Unbalance | View Details |
| E dL |
Washer attempts to lock the door/lid, clicks several times, then stops and displays E dL.
|
Door Lock Unable to Lock | View Details |
| E dLr |
Washer completes cycle but door remains locked; display may show E dLr or similar lock release error.
|
Door Lock Release Failure | View Details |
| E dO |
Washer will not start and displays E dO, indicating the door/lid is open even when it appears closed.
|
Door Open Detection Fault | View Details |
| E dP |
Washer displays E dP and will not proceed; often occurs at the start of drain or spin.
|
Drain Pump or Drain Path Error | View Details |
| E dr |
Washer stops mid-cycle and displays E dr; door remains locked for an extended time or unlocks unexpectedly.
|
Door Lock Communication Error | View Details |
| E dS |
Washer will not start spin or drain; display shows E dS indicating door switch error during spin.
|
Door Switch Open During Spin | View Details |
| E FL |
Washer will not start; display shows E FL shortly after pressing Start.
|
Door/Lid Lock Failure | View Details |
| E HE |
Washer shows E HE and may stop heating or abort hot cycles (models with internal heater).
|
Heater Circuit Error | View Details |
| E Hr |
Washer displays E Hr and may not complete cycles; often related to heater or temperature sensing (heater-related error).
|
Heater Relay or Temperature Regulation Error | View Details |
| E LE |
Washer attempts to start but stops and displays E LE; drum may not move.
|
Motor Lock / Locked Rotor Error | View Details |
| E LF |
Washer fills for a long time but does not reach proper level; display shows E LF (long fill).
|
Long Fill Condition | View Details |
| E nF |
Washer will not fill with water; display shows E nF or fills very slowly then errors out.
|
No Fill / Fill Timeout | View Details |
| E OE |
Washer displays E OE and may stop mid-cycle with water still in the tub.
|
Overflow or Drain Error (Model-dependent) | View Details |
| E OF |
Washer continues to fill and may overflow; display shows E OF or overfill error.
|
Overfill / Water Level Sensing Failure | View Details |
| E PS |
Washer displays E PS and will not start or stops randomly during cycle.
|
Power Supply or Control Voltage Error | View Details |
| E SP |
Washer will not enter spin; display shows E SP or spin error.
|
Spin Cycle Failure | View Details |
| E tL |
Washer displays E tL and may not sense load size correctly; water level seems wrong.
|
Load Sensing / Torque Limit Error | View Details |
| E tS |
Washer stops and displays E tS; cycle time does not advance correctly.
|
Thermistor/Temperature Sensor Fault (for models with internal heater or temp sensor) | View Details |
| E Ub |
Washer stops or will not reach full spin speed; display shows E Ub or unbalance error.
|
Unbalanced Load Detection | View Details |
| – |
Detergent remains in the dispenser drawer at the end of the cycle.
|
Dispenser Not Flushing Properly | View Details |
| – |
Front-load washer door will not open at end of cycle, but there is no error code.
|
Door Stuck Closed | View Details |
| – |
Top-load washer agitator moves weakly or only the bottom portion moves.
|
Worn Agitator Dogs / Clutch | View Details |
| – |
Washer display and lights work but buttons do not respond or respond intermittently.
|
User Interface / Control Panel Failure | View Details |
| – |
Washer emits a loud grinding or rumbling noise, especially during spin.
|
Tub Bearing Failure | View Details |
| – |
Washer fills but will not agitate; drum does not move during wash portion of cycle.
|
No Agitation | View Details |
| – |
Washer has a strong moldy or musty odor inside the drum.
|
Biofilm / Mold Build-Up | View Details |
| – |
Washer hums but does not start filling, agitating, or spinning.
|
Stalled Motor or Pump | View Details |
| – |
Washer is leaking water from the front or bottom during wash or spin.
|
Water Leak | View Details |
| – |
Washer leaves black or greasy marks on clothing.
|
Contamination from Drive System or Mold | View Details |
| – |
Washer leaves clothes still soapy or with detergent streaks after cycle.
|
Poor Rinsing | View Details |
| – |
Washer makes loud banging or knocking noises during spin.
|
Excessive Vibration / Out-of-Balance Noise | View Details |
| – |
Washer takes much longer than normal to complete cycles; time remaining jumps or stalls.
|
Extended Cycle Time / Control Rebalancing | View Details |
| – |
Washer trips the household breaker or GFCI during operation.
|
Electrical Short / Ground Fault | View Details |
| – |
Washer vibrates excessively and "walks" across the floor during spin.
|
Severe Vibration / Walking Washer | View Details |
| – |
Washer will not drain; water remains in tub after cycle ends.
|
No Drain | View Details |
| – |
Washer will not power on at all; no lights or display.
|
No Power / Dead Control | View Details |
| – |
Washer will not spin; clothes come out soaking wet at the end of the cycle.
|
No Spin / Spin Failure | View Details |
| – |
Water slowly seeps into the drum when the washer is off.
|
Inlet Valve Seepage | View Details |
No matching codes found
Advertisements