Washer door will not unlock at end of cycle; clothes are trapped inside, no error code shown.

Safety: Disconnect power. Do not force the door open with excessive strength; you may damage the cabinet or glass.

• Wait and power reset: Allow 2–5 minutes after cycle end for the lock to release. Then unplug for 5 minutes and reconnect to see if the lock resets.
• Check for water: If water remains in the drum, drain via the pump filter or emergency drain hose. The door will not unlock if the machine thinks it is full of water.
• Manual release: Many Indesit models have a manual door release tab near the pump filter or behind the lower front panel. Pull the tab gently to release the lock.
• Inspect lock and handle: Once open, check the door catch and handle for damage. Access the lock from behind the front panel and test/replace the door lock assembly if it sticks mechanically or electrically.