Inglis
Inglis Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Washer will not start a cycle, control panel lights may be on but nothing happens when Start is pressed.
Main Control Board Failure
F02
Washer stops mid-cycle and displays F02, clothes remain wet, water visible in drum, extended drain time.
Long Drain Fault
F05
Washer displays F05 and may not advance, often associated with water level sensing issues or overfilling/underfilling.
Water Temperature or Pressure Switch Error (model-dependent)
F06
Washer displays F06 and will not spin or tumble; may stop shortly after starting a cycle.
Motor Tachometer or Motor Drive Error
F09
Washer shows F09 and may have water remaining in the tub or may overfill and then stop.
Overflow or Water Level Fault
F11
Washer displays F11 and may stop mid-cycle, often during spin or drain; communication error between boards.
Serial Communication Error
F13
Washer displays F13 and may not lock or unlock the door; cycle will not start or end properly.
Dispenser or Door Lock Error (model-dependent)
F21
Washer displays F21, will not drain or takes a very long time to drain; may stop with water in the drum.
Long Drain Time
F22
Washer displays F22 and the door will not lock; cycle will not start.
Door Lock Failure
F23
Washer displays F23 and may stop mid-cycle; often associated with heater or temperature sensor issues on certain Inglis front-load models.
Heater or Temperature Sensor Error
F24
Washer displays F24, often during heating phases; water may not reach target temperature.
Water Temperature Sensor Error
F25
Washer displays F25 and may not spin properly; often related to drive system feedback.
Drive Motor Tachometer Error
F26
Washer displays F26 and may not start or may stop unexpectedly; door lock status error.
Door Switch Input Error
F28
Washer displays F28 and may not respond to control inputs; communication error between user interface and main control.
User Interface to CCU Communication Error
F29
Washer displays F29 and door may remain locked; drain may have completed but spin did not start.
Door Unlock Error
F30
Washer displays F30 and may not dispense detergent or softener correctly.
Dispenser System Error
F31
Washer displays F31 and may not spin at high speed; imbalance or speed control issue.
Motor Control or Speed Error
F33
Washer displays F33 and may not fill or may stop during fill; pump drive or pressure system error.
Pump Drive or Pressure System Error
F34
Washer displays F34 and door will not lock at the start of the cycle.
Door Locking Error
F35
Washer displays F35 and may not start or may stop during fill; analog pressure sensor error on some Inglis models.
Analog Pressure Sensor Failure
F40
Washer displays F40 and will not start; communication error between main control and motor control on some models.
ACU to Motor Control Communication Error
F70
Washer displays F70 and becomes unresponsive; communication error between user interface and main control.
User Interface Communication Failure
F71
Washer displays F71 and may not respond to certain buttons; user interface mismatch or failure.
User Interface Mismatch or Failure
Ld
Top-load Inglis washer displays Ld (Long Drain) and stops with water in the tub.
Long Drain Fault
LF
Top-load Inglis washer displays LF (Long Fill) and may stop before wash begins.
Long Fill Fault
Sd
Washer displays Sd or Sud and may pause or extend cycle time; excessive suds detected.
Excessive Suds Condition
UL
Top-load Inglis washer displays UL and stops or slows spin; load is out of balance.
Unbalanced Load Detection
Symptom
Control knobs or buttons do not respond, but some lights may be on.
User Interface Failure
Symptom
Top-load washer agitator does not move clothes properly; only the bottom moves or it slips.
Worn Agitator Dogs / Directional Cogs
Symptom
Washer does not fill with hot or cold water; only one temperature works.
Partial Fill / Single Temperature Failure
Symptom
Washer drum does not turn freely by hand, feels seized or very stiff.
Seized Drum / Bearing or Foreign Object Jam
Symptom
Washer emits a loud grinding or rumbling noise during spin, often getting worse over time.
Tub Bearing or Drum Support Failure
Symptom
Washer fills with water but will not agitate or tumble; drum does not move during wash.
Drive System Failure (No Agitation/Tumble)
Symptom
Washer has a strong moldy or musty odor, especially in front-load models.
Biofilm and Mold Buildup
Symptom
Washer intermittently shuts off mid-cycle and then restarts or stays off.
Intermittent Power / Control Dropout
Symptom
Washer leaks water from the front or bottom during wash or spin.
Water Leak
Symptom
Washer leaves clothes with detergent residue or not fully rinsed, even after normal cycles.
Poor Rinsing Performance
Symptom
Washer lid will not lock on a high-efficiency top-load Inglis model; cycle will not start or spin.
Lid Lock Failure
Symptom
Washer makes loud banging or knocking noises during spin, sometimes walking across the floor.
Excessive Vibration / Out-of-Balance Spin
Symptom
Washer overfills or continues to fill with water even when unplugged.
Water Inlet Valve Stuck Open
Symptom
Washer will not power on at all, no lights or display, completely dead.
No Power / Dead Control
Symptom
Washer will not spin, clothes come out soaking wet, but it may drain water.
No Spin / Spin Cycle Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Washer will not start a cycle, control panel lights may be on but nothing happens when Start is pressed.
|
Main Control Board Failure | View Details |
| F02 |
Washer stops mid-cycle and displays F02, clothes remain wet, water visible in drum, extended drain time.
|
Long Drain Fault | View Details |
| F05 |
Washer displays F05 and may not advance, often associated with water level sensing issues or overfilling/underfilling.
|
Water Temperature or Pressure Switch Error (model-dependent) | View Details |
| F06 |
Washer displays F06 and will not spin or tumble; may stop shortly after starting a cycle.
|
Motor Tachometer or Motor Drive Error | View Details |
| F09 |
Washer shows F09 and may have water remaining in the tub or may overfill and then stop.
|
Overflow or Water Level Fault | View Details |
| F11 |
Washer displays F11 and may stop mid-cycle, often during spin or drain; communication error between boards.
|
Serial Communication Error | View Details |
| F13 |
Washer displays F13 and may not lock or unlock the door; cycle will not start or end properly.
|
Dispenser or Door Lock Error (model-dependent) | View Details |
| F21 |
Washer displays F21, will not drain or takes a very long time to drain; may stop with water in the drum.
|
Long Drain Time | View Details |
| F22 |
Washer displays F22 and the door will not lock; cycle will not start.
|
Door Lock Failure | View Details |
| F23 |
Washer displays F23 and may stop mid-cycle; often associated with heater or temperature sensor issues on certain Inglis front-load models.
|
Heater or Temperature Sensor Error | View Details |
| F24 |
Washer displays F24, often during heating phases; water may not reach target temperature.
|
Water Temperature Sensor Error | View Details |
| F25 |
Washer displays F25 and may not spin properly; often related to drive system feedback.
|
Drive Motor Tachometer Error | View Details |
| F26 |
Washer displays F26 and may not start or may stop unexpectedly; door lock status error.
|
Door Switch Input Error | View Details |
| F28 |
Washer displays F28 and may not respond to control inputs; communication error between user interface and main control.
|
User Interface to CCU Communication Error | View Details |
| F29 |
Washer displays F29 and door may remain locked; drain may have completed but spin did not start.
|
Door Unlock Error | View Details |
| F30 |
Washer displays F30 and may not dispense detergent or softener correctly.
|
Dispenser System Error | View Details |
| F31 |
Washer displays F31 and may not spin at high speed; imbalance or speed control issue.
|
Motor Control or Speed Error | View Details |
| F33 |
Washer displays F33 and may not fill or may stop during fill; pump drive or pressure system error.
|
Pump Drive or Pressure System Error | View Details |
| F34 |
Washer displays F34 and door will not lock at the start of the cycle.
|
Door Locking Error | View Details |
| F35 |
Washer displays F35 and may not start or may stop during fill; analog pressure sensor error on some Inglis models.
|
Analog Pressure Sensor Failure | View Details |
| F40 |
Washer displays F40 and will not start; communication error between main control and motor control on some models.
|
ACU to Motor Control Communication Error | View Details |
| F70 |
Washer displays F70 and becomes unresponsive; communication error between user interface and main control.
|
User Interface Communication Failure | View Details |
| F71 |
Washer displays F71 and may not respond to certain buttons; user interface mismatch or failure.
|
User Interface Mismatch or Failure | View Details |
| Ld |
Top-load Inglis washer displays Ld (Long Drain) and stops with water in the tub.
|
Long Drain Fault | View Details |
| LF |
Top-load Inglis washer displays LF (Long Fill) and may stop before wash begins.
|
Long Fill Fault | View Details |
| Sd |
Washer displays Sd or Sud and may pause or extend cycle time; excessive suds detected.
|
Excessive Suds Condition | View Details |
| UL |
Top-load Inglis washer displays UL and stops or slows spin; load is out of balance.
|
Unbalanced Load Detection | View Details |
| – |
Control knobs or buttons do not respond, but some lights may be on.
|
User Interface Failure | View Details |
| – |
Top-load washer agitator does not move clothes properly; only the bottom moves or it slips.
|
Worn Agitator Dogs / Directional Cogs | View Details |
| – |
Washer does not fill with hot or cold water; only one temperature works.
|
Partial Fill / Single Temperature Failure | View Details |
| – |
Washer drum does not turn freely by hand, feels seized or very stiff.
|
Seized Drum / Bearing or Foreign Object Jam | View Details |
| – |
Washer emits a loud grinding or rumbling noise during spin, often getting worse over time.
|
Tub Bearing or Drum Support Failure | View Details |
| – |
Washer fills with water but will not agitate or tumble; drum does not move during wash.
|
Drive System Failure (No Agitation/Tumble) | View Details |
| – |
Washer has a strong moldy or musty odor, especially in front-load models.
|
Biofilm and Mold Buildup | View Details |
| – |
Washer intermittently shuts off mid-cycle and then restarts or stays off.
|
Intermittent Power / Control Dropout | View Details |
| – |
Washer leaks water from the front or bottom during wash or spin.
|
Water Leak | View Details |
| – |
Washer leaves clothes with detergent residue or not fully rinsed, even after normal cycles.
|
Poor Rinsing Performance | View Details |
| – |
Washer lid will not lock on a high-efficiency top-load Inglis model; cycle will not start or spin.
|
Lid Lock Failure | View Details |
| – |
Washer makes loud banging or knocking noises during spin, sometimes walking across the floor.
|
Excessive Vibration / Out-of-Balance Spin | View Details |
| – |
Washer overfills or continues to fill with water even when unplugged.
|
Water Inlet Valve Stuck Open | View Details |
| – |
Washer will not power on at all, no lights or display, completely dead.
|
No Power / Dead Control | View Details |
| – |
Washer will not spin, clothes come out soaking wet, but it may drain water.
|
No Spin / Spin Cycle Failure | View Details |
No matching codes found
Advertisements