IPSO
No Power / Dead Machine
Washer does not start; no lights or display
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown main fuse or circuit breaker, Faulty power cord, Defective main power switch, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Ensure the washer is unplugged before opening any panels. Only qualified persons should work on live circuits.
Steps to check and correct:
- Check outlet: Test the wall outlet with another appliance or a meter to confirm correct voltage.
- Inspect power cord: Look for cuts, burns, or loose connections at the strain relief. Replace the cord if damaged.
- Check internal fuse: Some IPSO models have an internal line fuse on the main board. Access the control area and test/replace the fuse with the same rating if blown, after identifying and correcting the cause.
- Test power switch: If equipped with a separate on/off switch, test for continuity when switched on.
- If still dead: The main control board's power supply section may have failed and will require board replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements