Washer leaks water from the front, often from under the door.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety First: Unplug the washer and turn off water supply before inspecting for leaks.
Step-by-step checks:
- Inspect door bellow: Open the door and carefully examine the rubber gasket all the way around. Look for tears, holes, or mold buildup.
- Clean seal: Remove coins, hairpins, or debris trapped in the folds. Wipe with a mild detergent solution.
- Check clamps: Verify the inner and outer retaining clamps are secure and the gasket is fully seated on both the tub and front panel.
When to replace: Replace the door bellow if any tears or permanent deformation are found. Ensure the new gasket is installed with the alignment marks matching the tub and front panel.
Repair Difficulty
Required Part
We may earn a commission from links on this page.