Washer door will not open at the end of the cycle, but no error code is shown.

Safety first: Do not force the door open. Unplug the washer before attempting manual release.

• Wait a few minutes: Many Little Swan models delay unlocking until the drum stops completely and cools slightly.
• Check for remaining water: If water is visible through the door, run a drain/spin cycle. A high water level will keep the door locked.
• Use emergency release: Access the manual release cord or lever near the door lock from the lower front panel and pull gently.
• Inspect door lock: If the problem recurs, replace the door lock assembly, as its internal mechanism may be sticking.