Washer shows F34, door may not lock at start of cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted or open door lock coil, damaged door lock wiring, failed main control door lock driver

Safety first: Unplug the washer before accessing the door lock or control.

Step-by-step:

Inspect door lock: Access the door lock assembly and check for visible damage or burnt smell.
Check wiring: Verify the harness is intact and firmly connected.
Replace door lock: If the lock coil is open or shorted (technician test), replace the door lock assembly.
Control check: If a new lock does not resolve F34, the main control board may have a failed driver circuit and require replacement.

Hard 4/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.