Washer shows F38, may not heat or may stop with temperature-related error.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed heater relay on control, shorted heater, wiring short in temperature circuit, control board failure

Safety first: Unplug the washer and turn off water supply.

Step-by-step:

Inspect heater and wiring: Access the heater and check for burnt or shorted wiring.
Check for leaks: Look for water around the heater that could cause shorts.
Replace heater: If the heater is shorted or damaged, replace it.
Control replacement: If heater and wiring are good, the main control heater circuit may be faulty and require replacement.

Professional Required 5/5

Tub Heating Element

Check Price on Amazon

We may earn a commission from links on this page.