Maytag Long Drain Fault

Washer displays Ld, takes too long to drain, water remains in tub at end of cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged drain pump filter, obstructed drain hose, partially blocked standpipe, weak drain pump

Safety first: Unplug the washer and prepare for water spillage.

Step-by-step:

Check drain hose and standpipe: Ensure hose is not kinked and standpipe is clear.
Clean pump: Access and clean the drain pump filter and impeller as described for F21/F02.
Replace pump: If the pump is noisy, hot, or weak after cleaning, replace the drain pump assembly.

Medium 3/5

Drain Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.