Washer displays OFb, tub is overfilled or water level too high.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck open inlet valve, blocked pressure hose, failed pressure switch, control not shutting off fill

Safety first: Immediately turn off water supply and unplug the washer to stop filling.

Step-by-step:

Drain water: Run a drain/spin if possible, or manually bail water.
Inspect inlet valve: Replace the water inlet valve if it allows water through when de-energized.
Check pressure system: Inspect and clear the pressure hose and verify the pressure switch is functioning.

Hard 4/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.