Maytag Inlet Valve Mechanically Stuck Open

Washer overfills or continues filling with water even when unplugged.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Debris or mineral buildup in water inlet valve, worn valve seat, high water pressure damaging valve, incorrect valve installation

Safety first: Immediately turn off the hot and cold water supply valves at the wall. Unplug the washer.

Step-by-step:

Confirm valve failure: With the washer unplugged and water valves open, if water continues to enter the tub, the inlet valve is stuck open.
Replace inlet valve: Remove the top or rear panel, disconnect hoses and wiring from the inlet valve, and install a new valve assembly with the correct Maytag part number.
Flush lines: Before reconnecting, briefly flush the household supply lines into a bucket to remove debris.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.