F17
Miele
Door Unlocking Fault
Door will not unlock at end of cycle, F17 displayed
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door lock solenoid, Control not releasing lock, Broken door handle mechanism, Faulty door lock sensor
How to Fix / Troubleshooting
Safety first: Switch off the machine and unplug it. Do not force the door open.
- Wait a few minutes: Some Miele models delay unlocking. After 2–5 minutes, try opening again.
- Use emergency release: Open the lower service flap and pull the emergency door release (usually an orange or yellow tab or cord) to open the door.
- Inspect lock and handle: Check for a broken handle or latch. If the door opens only with the emergency release, the lock assembly is likely faulty.
- Do not bypass safety: Never attempt to bypass the lock electrically. Replace the door lock assembly if the fault repeats.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements