Door cannot be opened, F32 displayed even when machine is off

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed door lock mechanism, Faulty door lock sensor, Control board not releasing lock, Wiring harness fault

Safety first: Disconnect power. Do not force the door.

Use emergency release: Open the lower service flap and pull the emergency release to open the door and remove laundry.
Power reset: Leave the machine unplugged for 5–10 minutes, then reconnect and see if the error clears.
Inspect lock: Access the door lock from behind the front panel or via the seal. Look for broken plastic, burnt contacts, or loose wiring.
Replace lock if needed: If the lock does not actuate or signal correctly, replace the Miele door lock assembly.

Medium 3/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.