F9E2
Roper
Drain Pump Electrical Problem
Washer displays F9E2 and may have intermittent drain issues or control lockups.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open or shorted drain pump winding, Loose pump connector, Wiring harness damage, Control board pump driver failure
How to Fix / Troubleshooting
Safety First: Unplug the washer before electrical testing.
- Step 1 – Inspect pump connector: Access the drain pump and check the electrical connector for corrosion or looseness. Reseat firmly.
- Step 2 – Check wiring: Follow the harness from pump to control, looking for pinched or broken wires.
- Step 3 – Resistance test (advanced): Use a multimeter to measure pump winding resistance and compare to specifications. Replace pump if open or shorted.
If the pump tests good and wiring is intact, the main control board may be defective.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements