Roper
Start Circuit or Lid Switch Interlock Failure
Washer will not start cycle; lights are on but pressing Start does nothing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Lid not detected as closed, Faulty lid switch or lock, Start button failure, Control board input fault
How to Fix / Troubleshooting
Safety First: Do not bypass safety interlocks for normal use. Unplug the washer before testing switches.
- Step 1 – Confirm lid closure: Ensure the lid is fully closed and the strike engages the lock.
- Step 2 – Check for error lights: Some models flash a lid lock or other indicator if the lid is not detected. Address any lid lock issues first.
- Step 3 – Try different cycles: Select another cycle and press Start to rule out a specific cycle button issue.
- Step 4 – Test lid switch (advanced): With power disconnected, test continuity of the lid switch/lock when the lid is closed. Replace if it does not change state.
If the lid switch is good and the UI responds but Start still does nothing, the main control or user interface may be defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Lid Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements