Samsung Internal Hose or Tub Leak

Washer leaks water from the bottom rear or underneath during fill or wash.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose tub-to-pump hose clamp, Cracked tub-to-dispenser hose, Damaged drain hose, Cracked outer tub

Safety: Unplug the washer and shut off water supply. Be prepared for water spills.

Access interior: Remove rear and/or front lower panels to locate the source of the leak while running a brief fill test.
Inspect hoses: Check the tub-to-pump hose, dispenser-to-tub hose, and main drain hose for cracks or loose clamps. Tighten or replace as needed.
Outer tub: If the plastic outer tub is cracked, replacement of the tub assembly is usually required and may not be cost-effective for DIY.

Hard 4/5

Tub-to-Pump Hose

Check Price on Amazon

We may earn a commission from links on this page.