Samsung
Drum Bearing Failure
Washer produces a loud grinding or rumbling noise during spin that gets worse over time.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear tub bearings, Failed tub seal allowing water into bearings, Bent or damaged spider arm on drum
How to Fix / Troubleshooting
Safety: Unplug the washer. Bearing replacement is complex and time-consuming.
- Confirm bearing issue: Spin the drum by hand with the washer off. Listen for grinding and feel for roughness. Lift the drum up and down to check for play.
- Inspect for leaks: Look for rust streaks or water around the rear of the tub.
- Plan repair: Replacing tub bearings and seal requires removing the drum and splitting the outer tub. Many Samsung models use a sealed tub that must be replaced as a complete assembly.
- Consider professional service: Due to the complexity and need for special tools, this repair is usually best left to an experienced technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Rear Tub Bearing / Outer Tub Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements