Washer displays E57; overcurrent or severe motor fault
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the washer immediately and do not attempt to run further cycles until inspected.
Steps to check and address E57:
- Check drum for jams: Rotate drum by hand to ensure it is not seized or obstructed.
- Inspect motor and harness: Look for obvious shorts, burnt smell, or melted insulation. Replace damaged components.
When to call a technician: Overcurrent faults often damage the inverter/PCB and should be professionally diagnosed and repaired.
Repair Difficulty
Required Part
We may earn a commission from links on this page.