E nF
Speed Queen
No Fill Error (Front-Load)
Front-load washer displays E nF; no water fill or very slow fill.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Closed water supply valves, Clogged inlet screens, Failed water inlet valve, Faulty water level/pressure sensor
How to Fix / Troubleshooting
Safety: Unplug washer and shut off water before disconnecting hoses.
- 1. Confirm water supply: Ensure both hot and cold valves are fully open and hoses are not kinked.
- 2. Clean inlet screens: Remove hoses and clean screens at the valve inlets. Remove mineral deposits carefully.
- 3. Test valve coils: Access the water inlet valve and check coil resistance. Replace the valve assembly if any coil is open or shorted.
- 4. Inspect pressure sensor hose: Check the small hose from the tub to the pressure sensor for blockages or disconnections.
- 5. Replace pressure sensor: If the valve is good but the machine still reports no fill, the pressure sensor may be misreading. Replace it if testing confirms a fault.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Inlet Valve Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements