Ub
Speed Queen
Severe Out-of-Balance Condition
Washer displays Ub and will not reach full spin speed; tub shakes excessively.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed suspension components, Worn tub dampers, Shipping bolts not removed (front-load models), Uneven floor or improper leveling
How to Fix / Troubleshooting
Safety: Unplug the washer before tipping or moving it.
- 1. Confirm shipping hardware: On new front-load Speed Queen units, verify all shipping bolts and braces have been removed according to the installation manual.
- 2. Level the machine: Adjust all four leveling feet so the washer is stable and does not rock. Tighten lock nuts.
- 3. Inspect suspension/dampers: Access the tub support system. Look for broken springs, detached rods, or leaking dampers. Replace any worn components as a set for best performance.
- 4. Check floor structure: Ensure the washer is on a solid, non-flexing surface. Reinforce or relocate if necessary.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Suspension Springs and Dampers
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements