Speed Queen
Spin Drive or Clutch Failure
Top-load Speed Queen washer will not spin but will agitate and drain.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drive belt, Failed clutch assembly, Faulty lid switch (spin interlock), Transmission spin failure
How to Fix / Troubleshooting
Safety: Unplug the washer before servicing. Spinning components can cause injury.
- 1. Verify lid switch: Ensure the lid closes fully and you hear a click from the lid switch. A failed switch will prevent spin. Test continuity and replace if faulty.
- 2. Inspect drive belt: Access the bottom or rear of the washer and check the belt for breakage or slippage. Replace if worn.
- 3. Check clutch (if equipped): Some Speed Queen models use a clutch to engage spin. Look for oil contamination or burned friction surfaces. Replace the clutch if it slips.
- 4. Transmission check: If the motor runs but the basket does not spin even with a good belt and clutch, the transmission may be defective. This is a major repair typically handled by a professional.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements