Washer heats water too slowly or not to the correct temperature, showing E61.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially scaled heating element, Incorrect NTC readings, Low supply voltage, PCB not energizing heater long enough

Safety: Disconnect power and allow the machine to cool.

Descale heater: Run a maintenance wash with a descaling agent suitable for washing machines to remove limescale from the heater and tub.
Test heater and NTC: Use a multimeter to verify correct resistance values. Replace any components that are out of specification.
Check wiring: Ensure all heater and NTC connections are tight and free from corrosion.

If E61 persists with good components, the control board may require replacement.

Medium 3/5

Heating Element

Check Price on Amazon

We may earn a commission from links on this page.