E2
Whirlpool Blower / Draft Fault

E2 error on gas power vent model, blower or pressure switch problem, unit will not fire

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed blower motor, blocked vent, defective pressure switch, disconnected pressure tubing

How to Fix / Troubleshooting

Safety first: Turn OFF power and gas.

Vent and blower checks:

  • Inspect vent termination outside for obstructions and clear them.
  • Check vent piping for kinks, sags, or disconnections.
  • Inspect blower wheel for debris and ensure it spins freely.
  • Check pressure switch tubing for cracks or water.

Corrective actions:

  • Replace a non-operational blower motor with the correct Whirlpool assembly.
  • Replace a pressure switch that does not close when draft is established.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Blower Motor / Pressure Switch
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements