AquaClean
Brine Tank Overfill
Softener occasionally overflows the brine tank, spilling salty water onto the floor.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck brine refill valve, Faulty safety float, Drain line restriction, Incorrect brine refill time
How to Fix / Troubleshooting
Safety: Unplug the unit and close the inlet valve. Clean up spills promptly to avoid corrosion or slipping.
Steps:
- Inspect safety float: Ensure the AquaClean brine safety float moves freely and shuts off water at the correct level.
- Check drain line: Clear any kinks or clogs that could prevent proper brine draw and cause overfill.
- Test refill valve: During refill, observe whether water stops at the correct level. If not, the valve may be stuck open.
- Adjust settings: Reduce brine refill time or volume in the control settings if set too high.
Replace the AquaClean brine refill valve or safety float assembly if they fail to stop water at the proper level.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
AquaClean Brine Safety Float Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements