AquaHouse No Brine Refill

Brine tank does not refill with water after regeneration; salt remains dry.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Clogged refill orifice, Stuck closed brine refill valve, Blocked brine line, Mis-programmed refill time or volume

How to Fix / Troubleshooting

Safety first: Unplug the unit and place it in BYPASS before disconnecting the brine line.

Step-by-step:

  • 1. Manually add water: Pour 2–3 gallons of water into the brine tank to allow at least one proper regeneration.
  • 2. Check programming: Verify that the AquaHouse controller has a non-zero brine refill time or volume set.
  • 3. Inspect brine line: Ensure the brine line from the valve to the tank is not kinked or blocked.
  • 4. Clean refill orifice: Remove the brine valve assembly and clean the small refill orifice or flow control. Rinse away any debris.
  • 5. Replace brine valve if needed: If water still does not enter the brine tank during refill, replace the AquaHouse brine valve kit.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

AquaHouse Brine Valve Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements