Aquasana
Moisture Intrusion into Control Head
Aquasana softener control head shows condensation or water droplets inside the display window
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
High humidity installation location, Leaking plumbing above control head, Cracked control head housing, Missing gasket or seal
How to Fix / Troubleshooting
Safety first: Unplug the power adapter immediately to prevent electrical damage. Do not operate the unit until dry.
Steps to address moisture:
- 1. Identify source: Check for dripping pipes, fittings, or condensation above the Aquasana control head.
- 2. Dry the unit: Remove the control head cover and allow the interior to dry completely in a warm, dry area.
- 3. Inspect seals: Check housing gaskets and seals for damage. Replace if missing or deteriorated.
- 4. Correct leaks: Repair any plumbing leaks that may be dripping onto the control head.
- 5. Replace control head if damaged: If corrosion or damage is visible on the board, replace the control head assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Head Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements