Water leaks from the brine tank or around the brine well

Safety first: Disconnect power. Avoid lifting a full brine tank; remove water first if relocation is needed.

• Identify leak source: Dry the outside of the brine tank and observe where new moisture appears.
• Check brine well seal: Inspect the grommet where the brine well enters the tank bottom. Reseat or replace the grommet if it is loose or damaged.
• Inspect brine line fittings: Tighten hose clamps or push-fit connectors at the brine line entry to the tank and at the valve head.
• Check for cracks: Look for visible cracks in the tank walls or base. If the tank is cracked, it must be replaced.
• Correct overfill: If the tank is overfilled, pump out excess brine and service the brine float and fill valve to prevent recurrence.