Culligan No Brine Refill

Brine tank is dry and never has water above the grid plate

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Plugged brine refill flow control, Closed brine shutoff, Kinked brine line, Low inlet pressure

Safety: Bypass the softener and relieve pressure before opening the valve head.

Observe refill stage: Start a manual regeneration and watch the end of the cycle. There should be a period where water flows into the brine tank.
Clean refill flow control: Remove the brine refill flow control button or orifice from the valve and clean any debris.
Check brine line routing: Ensure the line is not kinked or pinched and that any shutoff at the brine tank is open.

Medium 3/5

Culligan brine refill flow control

Check Price on Amazon

We may earn a commission from links on this page.