Fleck
High Pressure Drop Across Softener
Softener provides water but pressure is significantly reduced throughout the house.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Fouled resin bed with iron or sediment, undersized valve or plumbing, partially closed bypass, clogged drain line flow control restricting backwash
How to Fix / Troubleshooting
Safety first: Use caution when changing valve positions under pressure. For internal work, close inlet and depressurize.
- Bypass comparison: Put the Fleck valve in bypass. If pressure improves, the restriction is in the softener.
- Check bypass and shutoffs: Ensure all valves are fully open and the bypass is not partially closed.
- Clean or replace resin: If the system is old or iron-laden, perform a resin cleaning with an iron remover. If pressure remains low, replace the resin.
- Verify sizing: Confirm the Fleck valve and tank size are appropriate for your flow demands; undersized systems may need upgrading.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cation Exchange Resin
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements