GE
Noisy Valve Operation
Water softener makes loud clicking or grinding noises during regeneration.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or stripped motor gears, Misaligned cam, Debris in gear train, Failing valve motor
How to Fix / Troubleshooting
Safety first: Unplug the unit before removing the motor or gear cover.
- Step 1 – Listen to the source: Start a manual regeneration and carefully listen near the motor and cam area to pinpoint the noise.
- Step 2 – Inspect gears: Remove the motor and gear cover. Check plastic gears for missing teeth or excessive wear.
- Step 3 – Clean debris: Remove any plastic shavings or foreign objects from the gear train.
- Step 4 – Check cam alignment: Ensure the cam is properly seated on the rotor shaft and not rubbing against the housing.
- Step 5 – Replace motor/gear assembly: If gears are damaged or the motor is noisy and weak, replace the GE valve motor and gear assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Valve Motor and Gear Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements