Idrobase
No Brine Refill
Brine tank does not refill with water after regeneration
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked refill orifice, Stuck brine refill valve, Controller set to zero refill time, Clogged brine line
How to Fix / Troubleshooting
Safety: Disconnect power and isolate water before removing injector or valve parts.
- Check programming: Verify that the brine refill time is not set to zero in the controller.
- Inspect brine line: Ensure the brine line from the valve to the brine tank is not kinked or blocked.
- Clean refill orifice: Remove the injector/refill assembly and clean the small refill orifice with descaling solution and a soft brush.
- Test refill: Run a manual regeneration and observe the refill stage. If no water enters the brine tank, the refill valve or injector assembly may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Injector / Brine Refill Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements