Lindsay Under-Regeneration / Meter Not Counting

Softener never regenerates on demand even with high water usage

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed flow meter sensor, Stuck turbine, Broken meter wiring, Unit programmed in time-clock mode only

Safety first: Disconnect power before removing the flow meter.

Check mode: Ensure the Lindsay controller is set to demand (metered) mode if desired.
Verify flow reading: Open a faucet and check if the display shows flow. If not, clean or replace the turbine and sensor.
Inspect wiring: Reseat the flow meter connector on the board and check for damaged cable.

Medium 3/5

Lindsay outlet flow meter assembly

Check Price on Amazon

We may earn a commission from links on this page.