Tapworks
No Power to Control
Tapworks softener display is blank or very dim, unit appears dead
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse, Failed transformer, Loose power connection, Faulty control PCB
How to Fix / Troubleshooting
Safety: Always unplug the unit before opening the control housing. Only qualified persons should test live voltage.
- Check outlet: Test the wall socket with another appliance to confirm power is present.
- Inspect power cord: Look for damage or loose plug. Replace if necessary.
- Check transformer output: With a multimeter, measure the transformer secondary voltage and compare to its rating. Replace the Tapworks transformer if no output.
- Inspect internal fuse: Some Tapworks boards have a small fuse. Replace only with the same type and rating if blown.
- If power reaches the board but display remains dead: Replace the control PCB or display module as appropriate.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Tapworks Transformer
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements