Water2Buy
Brine Tank Overfill
Brine tank is full of water and may overflow (no code shown)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck brine valve, Blocked brine float/air check, Incorrect refill time, Cracked brine line allowing air leak
How to Fix / Troubleshooting
Safety first: Unplug power and close inlet valve. Use a bucket or wet/dry vacuum to remove excess brine.
- Inspect float assembly: Remove the brine well cover and lift out the float/air check. Clean off salt deposits and ensure it moves freely.
- Check brine line: Inspect tubing and fittings for cracks or loose connections. Replace damaged tubing with Water2Buy-compatible brine line.
- Adjust refill time: In the controller, reduce the brine refill time to the recommended value for your model.
- Monitor next cycle: After cleaning and adjustments, observe the next regeneration to ensure the water level stops at the correct height.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water2Buy brine float assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements